What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?
Last Updated: 03.07.2025 02:42
These devices are installed between the “hot” and “neutral” and protective ground.
Barnstars:
In schematic diagrams this is the symbol for a fuse:
Europe cuts interest rates as Trump's tariffs loom - BBC
But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).
a photo is worth a thousand words.
One is “what exactly is in a ‘surge protector’ ? ”
Kuo: Apple working on 7 head-mounted products, roadmap starts in 2025 - 9to5Mac
“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”
Because the load is inductive, the current lags the voltage.(by a bit).
This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.
Sunt accusamus voluptates dolorem porro excepturi quis officiis facere.
2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?
2024–10–11 [Victor Olarewsju Victor Olarewaju ]
(Dc diagram shown, AC is similar).
Kidney health and Restless Legs Syndrome explained: Symptoms, causes, and cure - Times of India
2024–10–16 [ OO OLAOYE OYEBODE ]
At least they know the answer if they wanted it.
2024–10–10[John johnson John Johnson ]
The Aging Brain: 6 Things You Should Be Doing to Slow Cognitive Decline - CNET
eight
The MOV will conduct when the voltage exceeds 50% of line voltage.
2024–10–00 [ Ammar Mahdi ] Ammar Mahdi
2024–10–14 [Omar Gharbi Omar Gharbi ]
He then asserts :
There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.
Craig Breslow Discusses Red Sox’ Struggles, Future Plans - MLB Trade Rumors
2024–10–11 [Bobby Sanchez Bobby Sanchez ].
So, the voltage could go up to 500 volts, and the fuse will not open up.
OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.
Who are your 5 top Hollywood Silver Screen legends?
P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.
Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.
“ A fuse is a device which protects the (circuit) against overload and short circuit.”
iFixit says the Switch 2 is even harder to repair than the original - The Verge
So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.
Now when you have a certain ac resistance, then a current flows in a loop.
But… the neutral is now “floating” because of the 1 ohm resistance.
Fighting game legend Brad 'Slips' Vitale passes away - EventHubs
Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".
Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.
This is where this question deviates from being a 'generic' question, and becomes more specific.
The third is lightning and “how it gets conducted into a home.”
When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.
[old diagram got deleted by accident]
Why would a person who is educated and skillful still find it hard to get a better job?
The other is “what does a “fuse” do?”
This is 'the assistant's answer'
nine
so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.
What does a fuse do?
At one ohm, the resistor has a maximum of 1 watt power.
so, what happens?
These are simplified answers to the original question, and does not change anything I wrote above.
A circuit breaker is similar, but is resettable.
Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.
First Sentence:
There are two important concepts here.
So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.
This is where the MOV conducts again, and dissipated the energy.
Edit 2024–10.
It also is a device that limits the change in current flow.
It seems Mohan does not understand the difference between a comment and an Answer.
What is lightning?
There are three different concepts here that are getting confused.
The bolt then partially travels down the line to your home.
A fuse is a non-resetable over current circuit protector.
I post the exact comment here.
Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.
“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”
This is the picture of an electronic coil of wire wound around a core of magnetic material.
If the nominal power is 4,000 watts then the current at 230volts is 16 amps.
This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.
He then describes the function of a fuse.
Can the fuse protect the electronic devices from lightning instead of a surge protector.
but this device (an Inductor) … impedes the rapid changes in the current.
He then describes Rainy Season and Lightning.
This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.
For this case there are devices called Metal oxide varistors (MOV).
This device then solves the entire problem.
But it can get overloaded, and no longer works.
(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).
It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.
[image of Common-mode choke]
At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.
One
but I think this circuit , shows a few more pieces.
And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.
This one hit behind the barn.
what exactly is a ‘surge’ protector?
An AC voltage/ current source, and an ac inductive load.
the problem then depends on "how fast does the fuse operate?".
Here is a simplified AC power diagram.
Upvotes:
Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.